Yamaha PM5D-RH V2 Manual Do Utilizador

For each input channel, you can specify the point at which 
insert in/out will be patched, and the point from which 
direct output will be taken. Here you can also switch Insert 
or Direct Output on/off.

A Insert view

When you move the cursor to an insert I/O point (

4

), 

the insert and direct output locations for that input 
channel will be shown graphically.

B INPUT CH (Input channel)

This is the number of the input channel you are edit-
ing. Two paired channels are indicated by a heart 
symbol shown at the left; settings 

3

–

6

 will be linked 

for these channels. You can click this symbol to enable/
disable pairing.

C INSERT ON/OFF

This button switches insert on/off for each channel. 
This is linked for two paired channels.

D INSERT I/O (Insert I/O point)

Here you can select one of the following as the insert-
in/out location for each channel.

E SET ALL

Turns on the corresponding item (insert or the insert 
point) for all channels (including channels not cur-
rently shown in the screen).

F CLEAR ALL

Turns insert off for all channels (including channels 
not currently shown in the screen).

1

Immediately before the EQ

Immediately after the EQ

Immediately before the delay

Immediately after the fader

2

56

4

3