Yamaha PM5D-RH V2 Manual Do Utilizador

When the destination MIX bus is paired, move the cur-
sor to a MIX PAN/BALANCE knob displayed in the 
CH to COPY area; then hold down the [SHIFT] key 
and click (or press the [SHIFT] key + [ENTER] key) to 
access the following window.

To set multiple parameters at once, use the [DATA] 
encoder to select one of the following items, and click 
the OK button.

The value of the selected MIX PAN/BALANCE knob 
will be copied to the pan (balance) of signals sent 
from that channel to all paired MIX buses.

The value of the selected MIX PAN/BALANCE knob 
will be copied to the pan (balance) of signals sent 
from all channels to that MIX bus.

PAN (BAL) COPY [ALL CH x ALL MIX]
The value of the selected parameter will be copied to 
the pan (balance) of signals sent from all channels to 
all paired MIX buses.

This screen lists the signals sent from the input channels to 
the MIX buses. You can also edit the settings from within 
this screen.

A CH to MIX/MIX from CH

Select one of the following two types of screen display.

❏ When the CH to MIX button is on

The screen shows the status of the signals sent from a 
specific input channel (input channel / ST IN channel) 
to all MIX buses. (Use the scroll bar to see input chan-
nels that are not currently shown.)

❏ When the MIX from CH button is on

The screen shows the status of the signals sent from all 
input channels to a specific MIX bus.

1

2

3