Yamaha PM5D-RH V2 Manual Do Utilizador
INPUT VIEW function
314
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual
Reference section
This screen shows the on/off status, level, and cue monitor
status of the input channels and DCA groups.
status of the input channels and DCA groups.
Except for the fact that this screen is for input channels,
DCA groups, and STEREO A/B channels, this is the same
as the OUTPUT VIEW function FADER VIEW screen.
Refer to p.273.
DCA groups, and STEREO A/B channels, this is the same
as the OUTPUT VIEW function FADER VIEW screen.
Refer to p.273.
In this screen you can copy the desired parameter(s) from
the selected input channel into a memory buffer, and paste
or move them to the same type of channel (you may select
more than one paste-destination).
the selected input channel into a memory buffer, and paste
or move them to the same type of channel (you may select
more than one paste-destination).
A JOB SELECT
Here you can select either Copy or Move as the
operation.
operation.
• COPY
The copy-source channel will remain; its parameters
will be copied to another channel.
will be copied to another channel.
• MOVE
The parameters will be moved to another channel.
Note
When you execute the channel move operation, the channels
between the selected channel and the move-destination chan-
nel will also move forward or backward.
between the selected channel and the move-destination chan-
nel will also move forward or backward.
FADER VIEW screen
FADER VIEW
CH JOB screen
CH JOB
CH JOB
1