Yamaha PM5D-RH V2 Manual Do Utilizador

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual

Reference section

381

Information shown

in the display

Function

menu

Global

functions

Output

functions

Input

functions

Appendices

General Specifications

PM5D/PM5D-RH

You paired input channels, but the
signal phase is incorrect

❍ Set the paired input channels to the same phase setting. Even when channels are paired, the phase set-

tings are not linked. (

➥ p.53)

When you recall a scene, some
channels/parameters are not
updated

❍ Could those channels/parameters be set to Recall Safe or Selective Recall? (➥ p.92, 94)

You turn on a CUE button in the
EFFECT PARAM screen, but it is
automatically defeated

❍ This is defeated automatically when you switch screens in the display. (➥ p.167)

Can’t make boost settings with the
GEQ

❍ In the GEQ PARAM screen, could LIMIT be set to –24 dB? (➥ p.119)

When you recall a scene, it takes a
certain amount of time for the faders
to stop

❍ Could you have specified a fade time? (➥ p.95)

The panel LEDs or LCD display are
too dark / too bright

❍ In the UTILITY function PREFERENCE 2 screen, use the BRIGHTNESS setting to adjust the brightness.

(

➥ p.206)

Can’t control the DSP5D that’s
cascade-connected to the PM5D

❍ Are the PM5D and DSP5D correctly cascade-connected?

❍ In the SYS/W.CLOCK function MIXER SETUP screen, is CASCADE CONNECTION set to the correct type?

❍ If the units are cascade-connected via the DCU5D, could two Ethernet cables be connected? To allow bi-

directional communication, connect one Ethernet cable between the DCU5D and DSP5D.

❍ Is the DSP5D’s machine ID number set correctly?

❍ In the SYS/W.CLOCK function MIXER SETUP screen, is the setting CASCADE ENABLED?

❍ Have you used a user-defined key or FADER MODE key to select the machine that you want to control

from the PM5D?

MIX channel signal is not sent from
MIX OUT connector

❍ For the output channel, is a MIX channel patched to the MIX OUT jack?

Can’t load from memory card

❍ Is the memory card formatted as FAT16?

❍ In the UTILITY function SECURITY screen, is the LOAD LOCK button turned off?

Sampling Frequency

Internal:

44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

External:

44.1 kHz (–10%) to 48 kHz (+6%)
88.2 kHz (–10%) to 96 kHz (+6%)

Signal Delay

PM5D:

Less than 2.3 ms INPUT to STEREO A,B (@Fs = 48 kHz)
Less than 1.15 ms INPUT to STEREO A,B (@Fs = 96 kHz)

PM5D-RH:

Less than 2.5 ms INPUT to STEREO A,B (@Fs = 48 kHz)
Less than 1.25 ms INPUT to STEREO A,B (@Fs = 96 kHz)

Fader

100mm motorized x38

Fader Resolution

+10 to –138, –

∞ dB (1024 steps/100 mm)

Maximum Voltage Gain

PM5D:

84 dB INPUT1-48 to Each Output

PM5D-RH:

86 dB INPUT1-48 to Each Output

Crosstalk (@1kHz)

–80 dB Adjacent Input Channels (INPUT1-48), GAIN: Min.

Dimensions

1551 x 950 x 283 mm (W x D x H)

Net Weight

PM5D:

98 kg

PM5D-RH:

97 kg

Power Requirements

PM5D:

480W, DC 24V, 20A (Use PW800W Only)

PM5D-RH:

528W, DC 24V, 22A (Use PW800W Only)

Operation free-air Temperature Range

+10 °C to +35 °C

Storage Temperature Range

–20 °C to +60 °C

Included Accessories

Owner’s Manual
Gooseneck Lamps x 3
Power Supply PW800W Connection Cable

Optional Accessories

mini YGDAI cards
Power Supply PW800W
Power Supply Link Cable PSL120