Yamaha PM5D-RH V2 Manual Do Utilizador

The MIX section adjusts the send level of the signals sent from input channels to MIX buses, and adjusts the output level of 
the MIX channels.

A [TO ST] LED

This LED will light when the signal sent from the MIX 
channel to the STEREO bus is on.

B [TO MTRX] LED

This LED will light when the signal sent from the MIX 
channel to the MATRIX bus is on.

C DCA group LEDs

The LED of the DCA group to which this MIX channel 
is assigned will light.

D MIX [PAIR] LED

This LED will light if adjacent odd-numbered/even-
numbered MIX channels are paired.

E MIX [ON] key

If the [MIX SEND] key (

9

) is on, this switches the sig-

nal sent from the input channel to the MIX bus on/off. 
If the [MIX MASTER] key (

J

) is on, this switches the 

MIX channel on/off.

F MIX encoder

If the [MIX SEND] key (

9

) is on, this adjusts the send 

level to the MIX bus. If the [MIX MASTER] key (

J

) is 

on, this adjusts the output level of the MIX channel.

G MIX [CUE] key

This is used to monitor a MIX channel via the Cue 
Monitor/Solo function.

H MIX [SEL] key

This selects the MIX channel to which operations in 
the SELECTED CHANNEL section or in the display 
will apply.

I [MIX SEND] key
J [MIX MASTER] key

These keys switch the operation of the MIX section. 
When the [MIX SEND] key is on, you can use the con-

trols of the MIX section to edit the send level and on/
off status of the signal being sent from the currently 
selected input channel to the MIX buses. Controls 
other than 

4

–

6

 will have no effect.

When the [MIX MASTER] key is on, you can use the 
controls of the MIX section to edit the output level and 
on/off status of the MIX channels.

❏ Sending signals from MIX channels to 

Here’s how a signal sent from an input channel to a MIX 
bus can be sent from the corresponding MIX OUT jack.

Press the [MIX MASTER] key in the MIX 
section.
When this key is on, you can use the MIX section to 
control the signals being sent from the MIX channels 
to the MIX OUT jacks.

Turn the MIX encoder to adjust the output 
level of the corresponding MIX channel.
The signal of the corresponding MIX channel will be 
sent from the corresponding MIX OUT jack.

If you want the meters of the panel to indi-
cate the output level of the MIX channels, 
press the [MIX/MATRIX] key of the meter 
section.
The output level of the MIX channels will be shown by 
the [INPUT/MIX] meters.

9

12

4

J

7

5

8

6

3

INPUT/MIX meters

[MIX/MATRIX] key