Yamaha WD83390 Manual Do Utilizador

Analog I/O & Digital I/O

Analog I/O & Digital I/O

This chapter describes the DM1000’s analog and digital input/output connectors as well as 
the basic operations involving the digital I/Os.

The DM1000’s rear panel features Input connectors 1–16, which enable you to connect  
microphone and line-level sources, and OMNI IN connectors, which enable you to connect 
line-level sources. Signals input at these connectors can be patched to Input Channels. (See 
page 109 for more information on patching Input Channels.)

These balanced XLR-3-31-type connectors accept line-level and 
microphone signals. The nominal input range is –60 dB through 
+4 dB.

These balanced XLR-3-31-type connectors accept line-level signals.  
The nominal signal level is +4 dB.

Inputs 1 through 16 feature switchable +48V phantom powering for 
use with condenser-type microphones and direct boxes.  Individual 
+48V [ON/OFF] switches on each input turn phantom power on 
and off.

Inputs 1 through 16 feature pad switches, which attenuate input sig-
nals by 20 dB.

Inputs 1 through 16 feature rotary gain controls that adjust input 
sensitivity. Input sensitivity ranges from +4 dB to –40 dB when the 
Pad is on, and from –16 dB to –60 dB when the Pad is off.

The SIGNAL indicator lights up when the input signal level is 20 dB 
below nominal. The PEAK indicator lights up when the input signal 
level is 3 dB below clipping.