Yamaha MGP32X Manual Do Utilizador

MGP32X/MGP24X     Owner’s Manual

This section adjusts the levels and controls the output of signals 
from the six AUX buses. Each of these signals outputs to the cor-
responding SEND (AUX1-AUX6) jack respectively.

q AUX knobs (1-6)

These knobs adjust the level of the signal from the indicated 
AUX1 to AUX6 buses into the corresponding SEND (AUX1 to 
AUX6) jacks. The “

t” position of the knob is the nominal 

level (0 dB).

w AFL (After-Fader Listen) switch and indicator

Turning this switch on monitors the post-AUX1 to AUX6 knob 
(q) signals that output to the MONITOR OUT and PHONES 
jacks for monitoring.

• The PFL signal has priority when both the PFL switch and 

AFL switch are on. To monitor the post-fader signal, make 
sure to turn off all PFL switches.

• If the PFL (preferred) is enabled, the AFL indicator does not 

light, even if the AFL switch is pressed.

This section adjusts the levels and controls the output of signals 
to the MATRIX OUT jacks from GROUP OUT and STEREO 
OUT. The signals from the MATRIX 1 and 2 buses are sent to the 
MATRIX 1 and 2 jacks respectively.

q GROUP knobs (1-4)

These knobs adjust the level of the signals sent from GROUP 
OUT 1-4 buses to the MATRIX OUT jacks.

w STEREO knobs (L, R)

These knobs adjust the level of the signals sent from STEREO 
OUT L/R buses to the MATRIX OUT jacks. 

e MATRIX master knobs (1, 2)

These knobs adjust the overall level of the signal output to the 
MATRIX OUT jacks. 

The “

t” positions of the knobs for (q), (w),and (e) indicate 

the nominal level (0 dB).

r AFL switch and indicator

When the AFL switch is on, the indicator will light and the sig-
nal after the MATRIX master knob is output to the PHONES 
and MONITOR OUT jacks for monitoring.