Yamaha 02R96 Manual Do Utilizador

MB02R96 Peak Meter Bridge

A 

These indicators show which channels are currently being 
metered: Input Channels 1–24, 25–48, or 49–56 and Aux Sends 
1–8 and Bus Outs 1–8.

B 

This button is used to set the metering position for Input Channels 
to pre-EQ, pre-fader, or post-fader. It works in unison with the 
PRE EQ, PRE FADER, and POST FADER buttons for Input 
Channels on the Meter pages. The indicators show the current set-
ting.

C 

This button is used to turn the Peak Hold function on and off. Its 
indicator lights up when Peak Hold is on. It works in unison with 
the PEAK HOLD buttons on the Meter pages.

D 

These button are used to select Layers for metering. The button 
indicator for the currently selected Layer lights up. If the Meter 
Follow Layer preference is on (see page 198), these Layers are 
selected automatically when the LAYER buttons on the 02R96 are 
pressed.

E 

This button is used to set the metering position for Output Chan-
nels to pre-EQ, pre-fader, or post-fader. It works in unison with 
the PRE EQ, PRE FADER, and POST FADER buttons for Output 
Channels on the Meter pages. The indicators show the current set-
ting.

F 

These 12-segment LED meters display the signals levels of the 
channels on the currently selected Layer.

G 

These 32-segment meters display the signal levels of the Stereo 
Out.

H 

This button is used to display the level of the Control Room signal 
on the STEREO meters. Its indicator lights up when the STEREO 
meters are displaying Control Room levels.

I 

These 12-segment LED meters display Bus Out signal levels.

1

3

4

7

6

8

2

5

9