Yamaha 02R96 Manual Do Utilizador
MIDI Channel Setup
165
02R96—Owner’s Manual
MIDI Channel Setup
MIDI Channels for reception and transmission are specified as follows.
1
Use the DISPLAY ACCESS [MIDI] button to locate the MIDI Setup page.
2
Use the cursor buttons or Parameter wheel to select the parameters, and use
the INC/DEC buttons or [ENTER] button to set them.
RECEIVE: The Channel buttons are used to select a MIDI Channel for MIDI message
reception. The Enable buttons are used to turn on and off reception of Program Change,
Parameter Change, and Control Change messages.
the INC/DEC buttons or [ENTER] button to set them.
RECEIVE: The Channel buttons are used to select a MIDI Channel for MIDI message
reception. The Enable buttons are used to turn on and off reception of Program Change,
Parameter Change, and Control Change messages.
TRANSMIT: The Channel buttons are used to select a MIDI Channel for MIDI message
transmission. The Enable buttons are used to turn on and off transmission of Program
Change, Parameter Change, and Control Change messages.
transmission. The Enable buttons are used to turn on and off transmission of Program
Change, Parameter Change, and Control Change messages.
OMNI: These buttons determine whether the 02R96 responds to Program Change and
Control Change messages only on the specified MIDI Receive Channel or on all Channels.
Control Change messages only on the specified MIDI Receive Channel or on all Channels.
ECHO: These buttons determine whether Program Change, Parameter Change, Control
Change, and Other Commands received at the MIDI IN port are echoed through to the
MIDI OUT port.
Change, and Other Commands received at the MIDI IN port are echoed through to the
MIDI OUT port.