Yamaha EMX68s Manual Do Utilizador

Example setups

EMX88S/EMX68S—Owner’s Manual

Example setups

This section provides some ways in which the EMX88S/EMX68S can be used, and explains connections and
operation.

As a conference PA system/installed sound system

This example shows the EMX88S/EMX68S used as a conference PA system or sound system. A sound mix dif-
ferent from that of the main speakers can be sent to the powered monitor speakers connected to the MONI-
TOR jack.

Connections

• Connect mics to channel input jacks.

• If you wish to use an external device such as a CD

player or LD player, connect the outputs of the
device to the 2TR IN jacks of the EMX88S/
EMX68S.

• If you wish to record the audio from the mics to a

cassette deck, connect the REC OUT jacks of the
EMX88S/EMX68S to the input jacks of the cas-
sette deck.

• Connect the main speakers to the SPEAKERS B1

or 2 jacks and the SPEAKERS A1 or 2 jacks.

• Connect the powered monitor speakers to the

MONITOR jack.

Playing back a CD player

Turn the power on in the order of periph-
eral devices ➞ EMX88S/EMX68S.

Adjust the MASTER control of the MAIN
section to the “√

√

” position.

Start playback on the CD player, and use
the MAIN section 2TR IN control to adjust
the level so that the 0 LED of the MAIN
section peak level meter does not light.

SPEAKERS B1/2

SPEAKERS A1/2

Set to MAIN L-R

VOL

Powered

monitor

Main Speakers

Microphone

Cassette Deck

CD Player

Note: You can connect a stereo playback device,
such as a CD player or an LD player, to channels
7–8 (EMX88S), 5–6 (EMX68S) LINE inputs.
The MIC and LINE inputs of channel 7 can be
used simultaneously but their levels cannot be
separately adjusted. (Same for channel
8 (EMX88S), 6 (EMX68S))