Roland SP-555 Manual Do Utilizador
52
About V-LINK
V-LINK (
) is functionality promoted by
Roland that makes it easy to synchronize visual effects with
music. By using video equipment that supports the use of V-
LINK (such as Edirol motion dive .tokyo Performance
Package), you can easily produce a variety of visual effects
that are linked to the expressive elements of your
performance.
For example, if you use the SP-555 in conjunction with the
motion dive .tokyo Performance Package, you’ll be able to
do the following.
music. By using video equipment that supports the use of V-
LINK (such as Edirol motion dive .tokyo Performance
Package), you can easily produce a variety of visual effects
that are linked to the expressive elements of your
performance.
For example, if you use the SP-555 in conjunction with the
motion dive .tokyo Performance Package, you’ll be able to
do the following.
• Use the SP-555’s synthesizer to produce synchronized
music and video performances.
• Play the SP-555’s pads or sequencer (songs or
patterns) to switch images on the motion dive .tokyo
Performance Package.
Performance Package.
• Use the SP-555’s CTRL 1–3 knobs and D Beam
controller to control the brightness or hue of an image.
In order to use V-LINK between the SP-555 and the motion
dive .tokyo Performance Package, you’ll need to make
connections using a MIDI cable (sold separately).
dive .tokyo Performance Package, you’ll need to make
connections using a MIDI cable (sold separately).
As an example, we will use a setup in which the SP-555 is
connected to the motion dive .tokyo Performance Package.
Use a MIDI cable to connect the SP-555’s MIDI OUT
connector to the MIDI IN connector of the Edirol MD-P1.
connected to the motion dive .tokyo Performance Package.
Use a MIDI cable to connect the SP-555’s MIDI OUT
connector to the MIDI IN connector of the Edirol MD-P1.
To prevent malfunction or speaker damage, minimize the
volume on all your equipment and turn off the power before
you make connections.
volume on all your equipment and turn off the power before
you make connections.
1.
Press the SP-555’s [V-LINK] button so it’s lit; V-LINK
will be on.
will be on.
When [V-LINK] is lit, you can operate the SP-555 to
control images in synchronization with the SP-555’s
performance.
control images in synchronization with the SP-555’s
performance.
2.
To turn off V-LINK, press [V-LINK] once again so its
light goes out.
light goes out.
What is V-LINK?
Connection example
SP-555
Edirol motion dive .tokyo
Performance Package
Performance Package
MIDI IN
MIDI OUT
Turning V-LINK on/off
Functions that you can control using CTRL
1–3 and D Beam
1–3 and D Beam
Display indication
Value
Response by motion
dive .tokyo
dive .tokyo
oFF
Off
1
ColorEQ Fore
✔
2
ColorEQ Back
✔
3
Scratch SW
✔
4
Speed Knob
✔
5
Total Fader
✔
6
Cross Fader
✔
7
BPM Sync SW
✔
8
Clip Loop SW
✔
9
Assign Knob
✔
10
Fade Time SW
✔
11
Visual Knob
✔
12
AB SW
✔
13
Tap SW
✔
14
Total Select
✔
15
FX Select
✔
16
Play Pos
✔
17
Loop Start Pos
✔
18
Loop End Pos
✔
19
Layer Mode Sel
✔
20
Playback Speed
21
Dissolve Time
22
T Bar
23
Color Cb
24
Color Cr
25
Brightness
26
VFX1
27
VFX2
28
VFX3
29
VFX4
30
Output Fade
SP-555_e.book 52 ページ 2007年6月25日 月曜日 午前9時9分