Roland S-1608 Manual Do Utilizador
6—Using the S-1608/S-0816 System
S-1608/S-0816 Digital Snake Owner’s Manual
35
Installing the Included Ferrite Core on Ethernet Cables
One ferrite core is included with both the S-1608 and S-0816 for installation on Ethernet cables. Install
a ferrite core on REAC cable SC-W100S (sold separately) or Ethernet cable near the RJ45 plug that will
be connected to a REAC port.
a ferrite core on REAC cable SC-W100S (sold separately) or Ethernet cable near the RJ45 plug that will
be connected to a REAC port.
Use the following procedure to install a ferrite core on an Ethernet cable.
1.
Lift up the ferrite core’s tabs and open the ferrite core.
fig.6-11.eps
2.
Place the REAC cable SC-W100S or Ethernet cable in the ferrite core so that the core abuts the
base of the cable’s connector.
base of the cable’s connector.
fig.6-12.eps
3.
Push the tabs until they close securely with a snapping sound.
fig.6-13.eps
For REAC connections, make sure to attach ferrite cores to your cables.
S-1608_e.book 35 ページ ２００７年４月２３日 月曜日 午後１２時５７分