Roland S-1608 Manual Do Utilizador
6—Using the S-1608/S-0816 System
40
S-1608/S-0816 Digital Snake Owner’s Manual
AC Power Connections
On the S-1608:
•
Connect one end of the supplied AC power cord to a grounded AC outlet, and the other end to
the POWER AC INPUT jack to provide power for the S-1608’s internal power supply.
the POWER AC INPUT jack to provide power for the S-1608’s internal power supply.
On the S-0816:
•
Connect one end of the supplied AC power cord to a grounded AC outlet, and the other end to
the POWER AC INPUT jack to provide power for the S-0816’s internal power supply.
the POWER AC INPUT jack to provide power for the S-0816’s internal power supply.
REAC Connections
Cable Requirements
A single cable REAC-to-REAC connection requires a standard Cat5e Ethernet cable with RJ45 plugs
wired in a straight-through or crossover configuration. The maximum length for a single cable is 100
meters (330 feet).
wired in a straight-through or crossover configuration. The maximum length for a single cable is 100
meters (330 feet).
fig.6-17.eps
Component Connections
Use only the supplied power cords to prevent damage to the units.
As a reminder, a “REAC-to-REAC” connection means connecting directly from REAC device to REAC
device, with neither REAC Splitter S-4000-SP nor Ethernet switching hub in between.
device, with neither REAC Splitter S-4000-SP nor Ethernet switching hub in between.
Maximum length: 100 meters
SC-W100S or Cat5e cable
S-1608
S-0816
S-1608_e.book 40 ページ ２００７年４月２３日 月曜日 午後１２時５７分