Roland S-1608 Manual Do Utilizador
Appendices
72
S-1608/S-0816 Digital Snake Owner’s Manual
Specifications: S-1608 STAGE UNIT
*1: When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount
of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting
device, though the maximum delay amount for a single splitting device should be about 200 microseconds.
device, though the maximum delay amount for a single splitting device should be about 200 microseconds.
* 0 dBu = 0.775 V rms
* In the interest of product improvement, the specifications and/or appearance of this unit accessories are subject to change without prior
notice.
Appendix D: Specifications
Number of Channels
16 in 8 out
AD Conversion
Sample Rate: 96.0 kHz
Signal Processing: 24 bits
Signal Processing: 24 bits
DA Conversion
Sample Rate: 96.0 kHz
Signal Processing: 24 bits
Signal Processing: 24 bits
Frequency Response
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Total Harmonic Distortion + Noise
0.05 % or less (Pad: On, Input Gain: +4 dBu, 22 Hz to 20 kHz)
Dynamic Range
110 dB
Cross Talk
-80 dB or less (Input Gain: +4 dBu, typ.)
Nominal Input Level
-65 to -10 dBu (PAD: Off)
-45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
-45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
PAD
20 dB On/Off
Input Impedance
14 k ohms
Nominal Output Level
+4 dBu, Max. +22 dBu
Output Impedance
600 ohms
Recommended Load Impedance
10 k ohms or greater
Residual Noise Level (IHF-A, typ.)
-80 dBu or less
Equivalent Input Noise Level (E.I.N.)
-128 dB
Network Latency
375 microseconds when using REAC cable only *1
(AD
(AD
REAC
DA Latency: about 1.2 ms)
Connectors
Input x 16 (XLR type, balanced, phantom power)
Output x 8 (XLR type, balanced)
DIGITAL OUT connector x 1 (Optical type)
REAC Connector x 1 (RJ-45 EtherCon type)
Remote Connector x 1 (RS-232C, DB-9 type)
Output x 8 (XLR type, balanced)
DIGITAL OUT connector x 1 (Optical type)
REAC Connector x 1 (RJ-45 EtherCon type)
Remote Connector x 1 (RS-232C, DB-9 type)
Indicators
POWER Indicator x 1, REAC Indicator x 1, REMOTE Indicator x 1,
MUTE ALL OUTPUTS Indicator x 1
MUTE ALL OUTPUTS Indicator x 1
Power Supply
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240V (50/60 Hz)
Power Consumption
45 W
Phantom Power
+48 V / 14 mA (each input, remote controlled)
Dimensions
401 (W) x 135.0 (D) x 177.0 (H) mm
15-13/16 (W) x 5-3/8 (D) x 7 (H) inches
15-13/16 (W) x 5-3/8 (D) x 7 (H) inches
Weight
5.5 kg
12 lbs 3 oz
12 lbs 3 oz
Operation Temperature
0 to +40 degrees Celsius
+32 to +104 degrees Fahrenheit
+32 to +104 degrees Fahrenheit
Accessories
Power Cord x 1, REAC Connector Covers x 1, Ferrite Core x 1, Rubber Foot x 4,
Rack Mount Kit x 1, Owner’s Manual
Rack Mount Kit x 1, Owner’s Manual
Options
REAC Splitter: S-4000-SP
Cat5e Ethernet Crossover Cable with Neutrik(R) EtherCon(R) Plug: SC-W100S (100 m)
Cat5e Ethernet Crossover Cable with Neutrik(R) EtherCon(R) Plug: SC-W100S (100 m)
S-1608_e.book 72 ページ ２００７年４月２３日 月曜日 午後１２時５７分