Roland TDA-700 Manual Do Utilizador

 

Panel Descriptions

 

fig.21

 

This is an input that accepts a stereo signal from the V-

Drums module through a single jack.

Connection is made simple using just one stereo phone cable 

to the module’s headphone output.

 

These jacks are for connecting a V-Drums sound module, 

backing machine, rhythm machine, etc. 

If you’re connecting a monaural device, connect to the L 

(MONO) jack of one pair. 

If you’re connecting a stereo device, make connections to 

both the L and R jacks of a pair.

 

Connect a mixer or recording device to either (or both) of 

these pairs of outputs.

There are two types of connectors: an XLR type and an 

unbalanced TRS 1/4" phone jack. Use the one appropriate for 

the equipment you’re connecting. 

If you’re making a mono connection, connect to the L 

(MONO) phone jack. 

 

This selects whether the XLR-type LINE OUT jacks are 

grounded or not. If you encounter noise problems that are 

possibly caused by a ground loop, try changing the switch 

position to alleviate the problem. 

 

Connect this jack to the 

 

 jack on a second 

TDA-700 when you wish to have true stereo output.

When a cable is connected to the 

 

 jack, 

the right-channel input signals are output from the internal 

speakers. The left-channel input signals are output from the 

 

 jack to the other TDA-700. 

 

Connect this jack to the 

 

 jack on the main 

unit (the other TDA-700) when a true stereo output is 

required. Left-channel input signals are output from the 

internal speakers.