Euphonix 840-07591-04 Manual Do Utilizador

 

Euphonix System 5 Installation Guide

System 5 Components

56

Manual Selection Buttons: The button below each Sample Rate LED row manually selects 
the Sample Rate Source. The DM714 also allows manual selection of the Sample Rate.

Power Switch: On/Off switch.

Figure 3-23 DM714 Rear Panel

Input Voltage Selector: This red switch allows the unit to operate in either 100/110/115 
VAC or 220/230/240 VAC environments. A fuse must also be changed for 220/230/240 
VAC operation. Units are shipped set and fused for 100/110/115 VAC. 

Power Connector (IEC) and Fuse Tray: The IEC power connector accepts standard IEC 
power cords. The fuse tray contains both the active fuse and a spare fuse for 220/230/240 
VAC operation.

AES/EBU Digital Inputs (female XLR): 12 AES/EBU stereo inputs.

Parallel AES/EBU Digital Inputs (female DB25): Three 8-channel digital connectors 
function in parallel with XLR digital inputs, and should not be used simultaneously with 
the XLR inputs. See Figure 3-24 on page 57 for pinout diagram.

Auxiliary Analog Inputs (female XLR): Two balanced analog inputs on XLR connectors. 
Input sensitivity is set from the front panel.

Auxiliary AES/EBU Digital Input (female XLR): Stereo AES/EBU digital input on one 
XLR connector. Functions in parallel with the auxiliary S/PDIF input and the two inputs 
should not be used simultaneously.

Auxiliary S/PDIF Digital Input (RCA): Stereo S/PDIF digital input on one RCA connec-
tor. Functions in parallel with the auxiliary AES/EBU input and the two inputs should not 
be used simultaneously.

AES Sync In (female XLR): Master clock input for the converter when using AES as Sam-
ple Rate Source.

AES Sync Thru (male XLR): Outputs the same signal connected to AES Sync In.

Word In (BNC): Master clock input for the converter when using Word Clock as Sample 
Rate Source.

PARALLEL AES/EBU INPUTS

1/

2

5/6

7/8

3/4

13/14

9/10

11/12

15/16

17/

18

19/

20

21/

22

23/

24