Euphonix 5B Manual Do Utilizador
System 5-B Digital Audio Mixing System Operation Manual
eMix Application
37
Normalled Connections
The inputs and outputs that require normalled connections should be designated in
PatchNet and saved to the Title Defaults.
The inputs and outputs that require normalled connections should be designated in
PatchNet and saved to the Title Defaults.
In this example, the console group bus outputs 1–24 should be hardwired to both the R-
1 and DAW inputs. Figure 4-6 shows the Group Bus outputs patched to the R-1 inputs.
1 and DAW inputs. Figure 4-6 shows the Group Bus outputs patched to the R-1 inputs.
If a Source is normalled to multiple destinations (i.e., R-1 and DAW), <MULT> ap-
pears in the blue cell next to the source name.
pears in the blue cell next to the source name.
Figure 4-6 Device Inputs normalled
Layouts
Layouts store the mapping of channels to strips on the console surface. See Layouts on
page 130 for more information.
Layouts store the mapping of channels to strips on the console surface. See Layouts on
page 130 for more information.
The following useful layout is typical:
•
Strips 1–24
Main: Channels 1–24; Swap Channels 25–48
•
Strips 25–48
Main: Channels 25–48; Swap Channels 49–72