Korg SP-500 Manual Do Utilizador
23
Playing the SP-500
Playing the SP-500
1.
Playing a sound
First let’s turn on the power and play the keyboard to produce sound.
Turing the power on
As described in the connection procedure on p.14, connect the AC/AC power supply, head-
phones, and pedal. Then turn on the power of the SP-500.
phones, and pedal. Then turn on the power of the SP-500.
1
Turn on the power
Leave the [VOLUME] slider set at about 0.
Press the [POWER] switch located on the rear panel. When you turn on the power, the
panel indicators will light, and the startup screen will appear.
Press the [POWER] switch located on the rear panel. When you turn on the power, the
panel indicators will light, and the startup screen will appear.
Turning the power off
Press the [POWER] switch once again. When the power is turned off, the panel indica-
tors will all go dark.
Press the [POWER] switch once again. When the power is turned off, the panel indica-
tors will all go dark.
2
Play the keyboard
While playing the keyboard, gradually adjust the [VOLUME] slider to adjust the vol-
ume.
ume.
If you are listening to the SP-500 through your monitor speakers, cassette-radio unit,
or audio system, adjust the output volume of this equipment as well.
or audio system, adjust the output volume of this equipment as well.
Adjusting the volume
Raise the [MASTER VOLUME] slider to the middle position. Moving the slider toward the right
will increase the volume, and moving it toward the left will decrease the volume. At a position of
“0” there will be no sound.
While actually playing the instrument, adjust the volume to an appropriate level.
will increase the volume, and moving it toward the left will decrease the volume. At a position of
“0” there will be no sound.
While actually playing the instrument, adjust the volume to an appropriate level.
Softer
Louder