Crate Amplifiers GTX120 Manual Do Utilizador
The Front Panel:
4
1
2
3
4
5
6
7
8
9
10
1: INPUT: Use this 1/4” jack to connect your guitar to the amplifier by means of a shielded instrument cable.
RHYTHM/SOLO CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive.
2: RHYTHM GAIN 1: Use this control to adjust the amount of light distortion for the Rhythm/Solo channel. Gain
1 produces less intense distortion than Gain 2 (#3) and is active when the Rhythm/Solo Gain switch (#5) is in
the out position.
1 produces less intense distortion than Gain 2 (#3) and is active when the Rhythm/Solo Gain switch (#5) is in
the out position.
3: SOLO GAIN 2: Use this control to adjust the amount of heavy distortion for the Rhythm/Solo channel. Gain
2 produces more intense distortion than Gain 1 (#2) and is active when the Rhythm/Solo Gain switch (#5) is
depressed.
2 produces more intense distortion than Gain 1 (#2) and is active when the Rhythm/Solo Gain switch (#5) is
depressed.
4: SHAPE: Use this control to “dial in” the tone for the Rhythm/Solo channel when Gain 2 is selected. Rotating
the control counterclockwise enhances the mid frequencies, while rotating the control clockwise enhances the
low and high frequencies.
the control counterclockwise enhances the mid frequencies, while rotating the control clockwise enhances the
low and high frequencies.
5: RHYTHM/SOLO SWITCH: Use this switch to select which gain control is active for the Rhythm/Solo chan-
nel. With the switch in the out position, Gain 1 (Rhythm) is selected. When the switch is depressed, Gain 2
(Solo) is selected.
nel. With the switch in the out position, Gain 1 (Rhythm) is selected. When the switch is depressed, Gain 2
(Solo) is selected.
6: LOW: Use this control to adjust the low frequency level of the Rhythm/Solo channel.
7: HIGH: Use this control to adjust the high frequency level of the Rhythm/Solo channel.
8: LEVEL: Use this control to adjust the output level of the Rhythm/Solo channel.
9: CHANNEL SWITCH: Use this switch to select the desired channel. With the switch in the out position, the
Clean channel is selected. When the switch is depressed, the Rhythm/Solo channel is selected.
Clean channel is selected. When the switch is depressed, the Rhythm/Solo channel is selected.
CLEAN CHANNEL: A normal gain channel designed to give you sounds from crystal clear to medium distortion.
10: LEVEL: Use this control to adjust the output level of the Clean channel.
11: LOW: Use this control to adjust the low frequency level of the Clean channel.
12: MID: Use this control to adjust the midrange frequency level of the Clean channel.
13: HIGH: Use this control to adjust the high frequency level of the Clean channel.
14: DSP LEVEL: Use this control to adjust the amount of digital effect: in its fully counterclockwise posi-
tion the signal will be “dry” (without any effect). As you rotate the control clockwise the amount of effect
increases.
tion the signal will be “dry” (without any effect). As you rotate the control clockwise the amount of effect
increases.
15: DSP MODE: Use this control to select one of the 16 built-in digital effects. The effects are shown on
page 3.
page 3.
GTX120/212
Guitar Amplifier
with
DSP
&
C
hannel
T
racking