Yamaha S112 Manual Do Utilizador
16
S412V/S112
Using the S412V/S112
■
Connecting
1.
Turn the amp’s power OFF and set the volume
to “0”.
* Connecting the speaker with the power ON or the vol-
ume turned up may result in damage to the speaker
or amp.
or amp.
2.
Using the supplied speaker cord, connect the
phone jack located on the back of the S412V/
S112 cabinet to the amp head’s speaker out-
put jack (the SPEAKER jack on the DG Series
Amplifier).
The S412V is a speaker enclosure equipped with four Celestion “Vin-
tage 30” speakers.
* The power rating is 240 W. Use an amp head with a power
output of less than 240 W.
* The impedance is 8
Ω
. Check the amp head’s impedance and
make sure it meets the speaker’s requirements.
* If you use more than two speakers, make sure the total im-
pedance meets the amp head’s requirements. See “Connect-
ing Speakers” section on page 8.
The S112 is a speaker enclosure equipped with a Celestion “G12H-
100” speaker.
* The power rating is 100 W. Use an amp head with a power
output of less than 100 W.
* The impedance is 8
Ω
. Check the amp head’s impedance and
make sure it meets the speaker’s requirements.
* If you use more than two speakers, make sure the total im-
pedance meets the amp head’s requirements. See “Connect-
ing Speakers” section on page 8.
■
Specifications
Speakers
30 cm speaker (Celestion “Vintage 30”) x 4
Power Rating
240 W
Impedance
8
Ω
Dimensions
765 x 820 x 359 mm
(WxHxD)
(30.1” x 32.2” x 14.1”) (w/casters)
Weight
44.0 kg (97 Ibs) (w/casters)
Accessory
Speaker Cable
●
Speaker
Speaker Size
30 cm (12”)
Voice Coil Size
44ø mm
Magnet
Ferrite 1.42 kg (50 oz)
Frequency Range
70 Hz – 5 kHz
Sensitivity
100 dB (1 m/W)
Power Rating
60 W (RMS)
Nominal Impedance
8
Ω
Fundamental Frequency
70 Hz
* Specifications and external appearance are subject to change without notice.
■
Specifications
Speaker
30 cm speaker (Celestion “G12H-100”) x 1
Power Rating
100 W
Impedance
8
Ω
Dimensions
542 x 510 x 284 mm
(WxHxD)
(21.3” x 20” x 11.2”)
Weight
16.0 kg (35 Ibs 4.4 oz)
Accessory
Speaker Cable
●
Speaker
Speaker Size
30 cm (12”)
Voice Coil Size
44ø mm
Magnet
Ferrite 1.42 kg (50 oz)
Frequency Range
82 Hz – 5.5 kHz
Sensitivity
100 dB (1 m/W)
Power Rating
100 W (RMS)
Nominal Impedance
8
Ω
Fundamental Frequency
82 Hz
* Specifications and external appearance are subject to change without notice.