Panasonic AV-HS410N Manual Do Utilizador

Página de 40
11
Installation and connections
p
wInstallation precautions
p
qIn addition to heeding the points presented in the “Read this first!”, observe the 
following precautions as well.
Connecting the power supply
p
 Be absolutely sure to use only the power 
cable supplied with the unit.
p
 The power cable supplied with the 
unit has a 3‑pin plug with a grounding 
terminal. 
Connect to a 3‑pin AC outlet which is equipped with a 
grounding terminal.
p
 Be absolutely sure to connect the ground terminal 
(SIGNAL GND) at the rear of the unit to the system ground.
p
 When the unit is not going to be used for a prolonged 
period of time, turn off its power, and disconnect the power 
plug from the AC outlet.
Handle carefully!
p
 Dropping the unit or subjecting it to strong impact or 
vibration may cause trouble and/or malfunctioning.
Do not allow any foreign objects to enter inside the 
unit!
p
 Allowing water, metal items, scraps of food or other foreign 
objects inside the unit may cause a fire and/or electric 
shocks.
Choosing the best installation location
p
 Install the unit on a sufficiently strong, stable and level 
surface for use.
p
 Ensure a space of at least 100 mm (3‑15/16 inches) 
around the unit’s vents to avoid obstructing ventilation.  
In particular, ensure sufficient space between ventilation 
and wiring when using mounted in a panel or table.
p
 Do not install the unit in a manner in which its cables and 
other accessories can be easily damaged.
p
 Avoid installing the unit where it will be exposed to direct 
sunlight or to the hot air that is blown out from other 
products.
p
 Installing the unit in a very humid, dusty or vibration‑prone 
location may give rise to trouble.
Ventilation holes