Pioneer MULTI PLAYER MULTIRREPRODUCTOR Manual Do Utilizador

DRB1509-B

3

2

This equipment is not waterproof. To prevent a fire or 
shock hazard, do not place any container filled with 
liquid near this equipment (such as a vase or flower 
pot) or expose it to dripping, splashing, rain or 
moisture.

To prevent a fire hazard, do not place any naked flame 
sources (such as a lighted candle) on the equipment.

When installing this unit, make sure to leave space 
around the unit for ventilation to improve heat radiation 
(at least 5 cm at rear, and 5 cm at each side).

Slots and openings in the cabinet are provided for 
ventilation to ensure reliable operation of the product, 
and to protect it from overheating. To prevent fire 
hazard, the openings should never be blocked or 
covered with items (such as newspapers, table-cloths, 
curtains) or by operating the equipment on thick carpet 
or a bed.

Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH 
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in 
locations exposed to high humidity or direct sunlight (or 
strong artificial light)

If the AC plug of this unit does not match the AC 
outlet you want to use, the plug must be removed 
and appropriate one fitted. Replacement and 
mounting of an AC plug on the power supply cord of 
this unit should be performed only by qualified 
service personnel. If connected to an AC outlet, the 
cut-off plug can cause severe electrical shock. Make 
sure it is properly disposed of after removal.
The equipment should be disconnected by removing 
the mains plug from the wall socket when left unused 
for a long period of time (for example, when on 
vacation).

The 

 switch on this unit will not completely shut off 

all power from the AC outlet. Since the power cord 
serves as the main disconnect device for the unit, 
you will need to unplug it from the AC outlet to shut 
down all power. Therefore, make sure the unit has 
been installed so that the power cord can be easily 
unplugged from the AC outlet in case of an accident. 
To avoid fire hazard, the power cord should also be 
unplugged from the AC outlet when left unused for a 
long period of time (for example, when on vacation).

Handle the power cord by the plug. Do not pull out the 
plug by tugging the cord and never touch the power 
cord when your hands are wet as this could cause a 
short circuit or electric shock. Do not place the unit, a 
piece of furniture, etc., on the power cord, or pinch the 
cord. Never make a knot in the cord or tie it with other 
cords. The power cords should be routed such that they 
are not likely to be stepped on. A damaged power cord 
can cause a fire or give you an electrical shock. Check 
the power cord once in a while. When you find it 
damaged, ask your nearest PIONEER authorized 
service center or your dealer for a replacement.

Alterations or modifications carried out without 
appropriate authorization may invalidate the user’s 
right to operate the equipment.

This product satisfies FCC regulations when shielded 
cables and connectors are used to connect the unit 
to other equipment. To prevent electromagnetic 
interference with electric appliances such as radios 
and televisions, use shielded cables and connectors 
for connections.

This product is a class 1 laser product classified 
under the Safety of laser products, IEC 60825-1:2007.

CLASS 1 LASER PRODUCT

When using this product, confirm the safety 
information shown on the bottom of the unit.