Denon Dj DN-X1700 Manual Do Utilizador

4

Q5

This sets the effects of EFX 1 or EFX 2 to ON 
or OFF.

Q6

Controls the relative output level from the 
summed A and B Mixes. When the fader is 
at its far left, only the A Mix is heard from the 
Outputs. As the fader is moved toward the 
right, the amount of B Mix is increased and the 
amount of A Mix is decreased. When the fader 
is centered, equal amounts of A and B Mixes are 
routed to the Outputs. Fully right is all B Mix at 
the Outputs.

Q7

Controls the level of the selected Input.

Q8

Accepts 1/4” stereo headphone plugs.

Q9

Adjusts the volume for the headphones.

W0

This is used to adjust the balance between the 
CUE sound and the master sound which are 
monitored using the headphones.

W1

There are two headphone monitor modes.

Stereo mode (SPLIT CUE OFF):
The cue signals and master signals can be 
monitored in stereo.

SPLIT CUE mode:
The monaural cue signals are heard through the 
left channel of the headphones, and the monaural 
master signals through the right channel.

W2

Allows adjusting the “shape” of the Crossfader 
response from a gentle curve for smooth, long 
running fades, to the steep pitch required for top 
performance cut and scratch effects.

W3

Adjusts the volume curve response of the 
channel fader.

W4

This function will start the performance of CD/
Media Player with Ch. Fader automatically is 

/

.

W5

Use this to switch the Crossfader Start function 

 and 

.

W6

This is used to adjust the level at which the mic 
signals are sent to the master output.

W7

These buttons enable the various effects of 
the selected side, either EFX 1 or EFX 2, to be 
obtained for the mic input signals.

W8

Contour the frequency response of the Mic 
input –15 dB to +15 dB.

W9

  • Use this to switch the Talk Over function ON and 

OFF. (ON/OFF is cyclic)

  • When the button is lit, level of signals except 

Mics is attenuated.
* The ducking attenuation level can be adjusted 

in the “UTILITY” mode.

E0

Adjusts the level of the Main Mic input.

E1

When the button’s LED is lighted, the mic 
signals take effect.

E2

These enable the line input of each channel to 
be selected as CD or PHONO.

CD:
Rear panel LINE1–4 CD terminal input

PHONO:
Rear panel LINE1–4 PHONO terminal input

E3

controls (channel input selector)
These enable any of six inputs to be selected 
for each of the channels. The same input 
can be selected for more than one channel. 
When DIGITAL is selected, the LED of the 
corresponding button lights up red; when USB 
is selected, it lights up blue.

LINE1

SOURCE SEL

CH1

CH4

SOURCE SEL

LINE2
LINE3
LINE4

DIGITAL

USB

E4

When these buttons are set to ON, the controls 
of the selected channels function as MIDI 
controllers. Also, the EQ control rings light up 
blue.

E5

These are used to adjust the levels of the 
selected inputs.

E6

These are used to change the frequency 
response of the selected inputs.
At the center position, the frequency response 
is fl at.
At the –∞ position, the frequencies of all the 
bands are cut off completely.

E7

Displays the input level after adjusted with 
LEVEL E5 and Source EQ E6 controls.

E8

These buttons enable the various effects of 
the selected side, either EFX 1 or EFX 2, to 
be obtained for the channel audio signals. The 
same effect (EFX 1 or 2) can be selected for a 
multiple number of channels. 
The LED of the EFX button for the side selected 
for each channel lights.

E9

Pressing in any or all of 

 buttons routes the 

respective source to the headphone and meter 
cue sections. Pressing multiple buttons makes 
it possible to derive mixed sound from the 
selected sources.
* The SOLO mode with no signals mixed can 

also be selected as a preset.

R0

A, B:
The channel source is assigned to A or B of the 
Crossfader.

THRU:
Select when you don’t assign the channel source 
into the Crossfader.

R1

Adjusts the L/R balance of the MASTER output.

R2

One of two modes can be selected for display 
on this meter.

The master output audio level is displayed.

The right channel master CUE (monaural) and 

left channel CUE (monaural) audio levels are 

displayed.

R3

This is the signal/peak meter for the mic input 
level.

Off:
No signals input (under –60 dB/FS)

Green:
Signal input (–60 dB/FS to under –20 dB/FS)

Orange:
Suitable signal input level (–20 dB/FS to under 
–6 dB/FS)

Red:
Excessively high signal input level (above –6 dB/
FS)