Alesis DM10 Manual Do Utilizador

Página de 52
 
10 
 
 EDITING VOICE & ACCOMPANIMENT PARAMETERS 
 
While editing your Kits by changing the Instruments in a 
drum Voice or the Accompaniment, you can also edit 
various parameters that affect each Layer and, therefore, 
the Instrument on that Layer.  You can do this for the drum 
Voices or the Accompaniment, though some parameters below may only be editable for one of these. 
 
1.
 
Press DRUM KIT to go to the Main Screen. 
2.
 
Press EDIT INST to edit drum Voice parameters or EDIT 
ACCOMP to edit Accompaniment parameters.  The top of 
the screen will show the number and name of the Kit 
whose Instruments (drum Voices or Accompaniment) you 
will be editing. 
3.
 
Select INST (F1).  The new screen will show: 
a.
 
the trigger Voice you are editing (the Kit number and 
name of the Voice will be shown). If you are editing 
the Accompaniment, this will read "Accomp." 
b.
 
the Layer (each trigger sound or Accompaniment 
track consists of two Layers, each with its own 
Instrument) 
c.
 
the Category (the type or "class" of drum sound or 
Accompaniment currently assigned to that Layer) 
d.
 
the Instrument (the drum or Accompaniment sound 
for that Layer) 
4.
 
If you are editing a Voice, select the Voice whose Instrument you want to change by pressing NOTE 
CHASE then striking the desired trigger.  Alternatively, you can highlight the Voice (next to the Kit 
number) using the CURSOR UP / DOWN buttons to highlight it and use the VALUE UP / DOWN 
buttons or VALUE DIAL to change it.  (This step is not necessary when editing Accompaniment.) 
Note:  You can also change the current Voice in this fashion in any of the subsequent menus.  You can 
also toggle between Layers by pressing EDIT INST whenever the "Layer: A B" selector is shown on the 
upper right corner of the LCD. 
5.
 
Select any of the options at the bottom of the LCD using the 
F-BUTTONS.  Use CURSOR UP / DOWN to move through 
the menu items and VALUE UP / DOWN or the VALUE 
DIAL to adjust the settings.  
• 
LVL (F2, 1st page): 
ƒ
  Level: The volume level for the selected Layer (01-
99 or "OFF"). 
ƒ
  Pan: The panning for the selected Layer ("L50" to "MID" to "R50"). 
ƒ
  Attack: The volume level of the initial attack of the note (00-99).  This parameter is only 
available when editing Accompaniment.  
ƒ
  Decay: How long the sound can be heard before decaying to silence (00-99 or "OFF").   
Note:  Setting this parameter to "OFF" disables the Decay parameter and the sound will be 
heard for its entire duration with no "shaping." 
 
• 
FX (F3, 1st page): 
ƒ
  Reverb: The amount of reverb on the Voice (00-
99). 
ƒ
  Effects: The Voice volume level sent to the DM10's 
effects processor (00-99). 
ƒ
  EQ/Comp: This sends the Voice to the DM10's 
equalizer and compressor ("ON" or "OFF"). 
 
• 
TONE (F1, 2nd page): 
ƒ
  Semitone: Tunes the Instrument ±12 semitones. 
ƒ
  Fine Tune: Tunes the Instrument ±50 cents. 
ƒ
  Filter: The cutoff frequency for the type of filter (see 
below) (00-99). 
ƒ
  Type: The type of filter ("LOPASS" or "HIPASS"). 
Note: The DM10 will retain any changes 
you make to the Instruments or parameters 
as you move between the various Kits.  
 
a