Extron electronic VLM 1000 Manual Do Utilizador

© 2009 Extron Electronics.  All rights reserved.

Extron 

USA - West 

Headquarters

Inside USA / Canada Only

+1.714.491.1517 FAX

Extron 

Inside USA / Canada Only

+1.919.863.1797 FAX

Extron 

Inside Europe Only

+31.33.453.4050 FAX

Extron 

Inside Asia Only

+65.6383.4664 FAX

Extron 

+81.3.3511.7656 FAX

Extron 

Inside China Only

+86.21.3760.1566 FAX

Extron 

+971.4.2991880 FAX

Stage 1 — Install the VLR 102 Receiver

c

  Cut a hole in the ceiling tile.  (page 2-4)

c

  Mount the receiver housing to the ceiling tile.  (page 2-4)

c

  Attach a conduit to the back plate if needed.  (page 2-5)

c

  Install the junction box.  (page 2-6)

c

  Attach the receiver housing to the junction box.  (page 2-6)

c

  Attach a conduit to the junction box if needed.  (page 2-6)

c

  Install a raceway if needed.  (page 2-7)

c

  Mark the mounting screw locations on the surface.  (page 2-7)

c

  If using a raceway, remove the appropriate knockout in the  

receiver housing.  (page 2-7)

c

Mount the receiver housing to the surface.  (page 2-8)

c

  Pull the cables to the receiver.  (page 2-10)

c

  Connect the cables to the receiver.  (page 2-10)

c

  Attach the receiver dome to the housing.  (page 2-11)

c

  Pull cables to the PoleVault switcher.  (page 2-13)

c

  Configure the system.  (page 2-14)

c

  Set up the microphone (page 2-14)

c

  Test the system.  (page 2-14)

c

  Complete the installation.  (page 2-15)