Land Pride & RTR1274 Manual Do Utilizador
10
RTR12 & RTA12 Series (Serial No. 884764-) Rotary Tillers 311-785M
8/12/14
Section 1: Assembly and Set-Up
Reverse Rotation (RTR) Rotary
Tillers
Tillers
The following are assembly instructions for reverse
rotation tillers (RTR12 Series). See page 12 for standard
rotation tillers (RTA12 Series).
rotation tillers (RTR12 Series). See page 12 for standard
rotation tillers (RTA12 Series).
IMPORTANT: Parking stand (#1) and wire retaining
pin (#7) must be installed at the correct height
before continuing. See “Parking Stand Installation”
on page 9 for special instructions.
pin (#7) must be installed at the correct height
before continuing. See “Parking Stand Installation”
on page 9 for special instructions.
RTR Parking Stand and Front Deflector Assembly
Figure 1-2
30348A
RTR Front Deflector Assembly
Refer to Figure 1-2:
1.
Remove 3/8
"
-16 x 1 1/2
"
bolts (#3), flat washers (#5),
lockwashers (#6), hex nuts (#4) and both front
deflector mounting bars (#2) from tiller frame.
deflector mounting bars (#2) from tiller frame.
2.
Insert 3/8
"
-16 x 1 1/2
"
GR5 hex head bolts (#3)
through flat washers (#5), upper mount bar (#2A),
front rubber deflector (#8) and mounting holes “A”.
front rubber deflector (#8) and mounting holes “A”.
3.
Secure rubber deflector and upper mounting bar with
lower mount bar (#2B), lock washers (#6) and hex
nuts (#7).
lower mount bar (#2B), lock washers (#6) and hex
nuts (#7).
4.
Tighten hex nuts to the correct torque.