Pentair IntelliFlo Manual Do Utilizador
28
IntelliFlo Installation and User’s Guide
Mo Flo (Modulation Output Flow)
M.O. Flo (Modulated Output Flow) is specifically designed for Pentair branded heaters with an
IntelliComm, although it can be used for other functions, such as water effects. This feature allows you to
have flexibility in flow control if the filter cycle flow is less than needed for certain devices. M.O. Flo also
allows you to program intervals of flow separated by a specific duration which can be useful for water
effects.
IntelliComm, although it can be used for other functions, such as water effects. This feature allows you to
have flexibility in flow control if the filter cycle flow is less than needed for certain devices. M.O. Flo also
allows you to program intervals of flow separated by a specific duration which can be useful for water
effects.
To setup the M.O. Flow option:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. Press the Up or Down arrows to select the “Features” menu. Press the
Down arrow button to select M.O. Flow. Press the Select button to access the M.O. Flow menu
settings. The M.O.Flow “Activation” setting is displayed.
settings. The M.O.Flow “Activation” setting is displayed.
3.
To enable M.O. Flow:
Press the Select button then the Down arrow button to select Enabled if not
already selected. Press the Enter button to save the setting.
4.
To set the flow rate for M.O. Flow:
Press the Down arrow button to select “Set Flow” setting. Press
the Select button to access the setting. To edit the flow rate (GPM) setting, see step 6.
5.
To set the run and interval time for M.O. Flow:
Press the Down arrow button to select “Set Run
Time” or Set Interval Time” setting. Press the Select button to access the setting. To edit the start
and stop time, see step 6.
and stop time, see step 6.
6. Press the Select button to change the current value.
7. To change the value, press the Left and Right arrows to select which digit to modify, then use the Up
and Down arrows to change the selected digit.
8. When you are done, press the Enter button to save the changes. To cancel any changes, press the
Escape button to exit edit mode without saving.
The following graphical representation shows when the M.O. Flo feature is enabled.
Flow
Run time Interval time
Programmed
Cycle
Cycle
M.O.Flo
set Flow
set Flow
Time
Enable/ Disable Set Flow Set Run Time Set Interval Time
Filter
Vacuum
Back
Wash
Manual
Enter
Select
Reset
Feature
2
Feature
1
Men
u
Escape
On
Warn.
Alarm
IntelliFlo
®
M.O. Flo
M.O. Flo
7:29
7:29
Disabled
Disabled
Start
Stop
Stop
Activation
Activation
Filter
Vacuum
Back
Wash
Manual
Enter
Sele
ct
Start
Stop
Stop
Reset
Feature
2
Feature
1
Men
u
Escape
On
Warn.
Alarm
IntelliFlo
®
M.O. Flo
M.O. Flo
7:29
7:29
Set Flow
Set Flow
50.GPM
50.GPM
Filter
Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Stop
Reset
Feature
2
Feature
1
Men
u
Escape
On
Warn.
Alarm
IntelliFlo
®
M.O. Flo
M.O. Flo
7:30
7:30
Set Run Time
Set Run Time
0:01
0:01
Filter
Vacuum
Back
Wash
Manual
Enter
Select
Start
Stop
Stop
Reset
Feature
2
Feature
1
Men
u
Escape
On
Warn.
Alarm
IntelliFlo
®
M.O. Flo
M.O. Flo
7:31
7:31
Set Interval Time
Set Interval Time
1:00
1:00
Filter
Vacuum
Back
Wash
Manual
Enter
Select
Reset
Feature
2
Feature
1
Men
u
Escape
On
Warn.
Alarm
IntelliFlo
®
Features
7:22
M.O. Flo
Start
Stop
Stop