Ridgid R5010 Manual Do Utilizador

5

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.

V

Volts

Voltage

A

Amperes

Current

Hz

Hertz

Frequency (cycles per second)

W

Watt

Power

min

Minutes

Time

Alternating Current

Type of current

n

0

No Load Speed

Rotational speed, at no load

Class II Construction

Double-insulated construction

.../min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute

Safety Alert

Precautions that involve your safety

Eye Protection

Always wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident
prevention measures.

DANGER:  Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.

CAUTION:  Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.

Important: Advises you of important information or instructions vital to the operation or maintenance of
the equipment.

Note: Advises you of additional information concerning the operation or maintenance of the equipment.

Wet Conditions Alert

Do not expose to rain or use in damp locations.