Lincoln Electric K1309-21 Manual Do Utilizador
[3]
www.lincolnelectric.com
Multi-Process Switch
3-position switch allows
quick and easy change
from electrode positive or
negative semiautomatic/
automatic wire feed welding
to stick or air carbon arc
gouging.
quick and easy change
from electrode positive or
negative semiautomatic/
automatic wire feed welding
to stick or air carbon arc
gouging.
Order K804-1.
Remote Output Control
Consists of a control box
with choice of two cable
lengths. Permits remote
adjustment of output.
6 pin connection.
with choice of two cable
lengths. Permits remote
adjustment of output.
6 pin connection.
Order K857 for 25 ft.
(7.6m) or K857-1 for
100 ft. (30.5m).
(7.6m) or K857-1 for
100 ft. (30.5m).
Deluxe Adjustable Gas
Regulator and Hose Kit
Regulator and Hose Kit
Accommodates CO
2
, Argon,
or Argon-blend gas cylin-
ders. Includes a cylinder
pressure gauge, dual scale
flow gauge and 4.3 ft.
(1.3m) gas hose.
ders. Includes a cylinder
pressure gauge, dual scale
flow gauge and 4.3 ft.
(1.3m) gas hose.
Order K586-1.
Undercarriage
Platform undercarriage with
mountings for two gas cylin-
ders at rear of welder.
mountings for two gas cylin-
ders at rear of welder.
Order K841.
Accessory Kit
For stick welding. Includes
35 ft. (10.7m) 2/0 electrode
cable with lug, 30 ft. (9.1m)
2/0 work cable with lugs,
headshield, filter plate,
cover plate, work clamp
and electrode holder.
35 ft. (10.7m) 2/0 electrode
cable with lug, 30 ft. (9.1m)
2/0 work cable with lugs,
headshield, filter plate,
cover plate, work clamp
and electrode holder.
Order K704.
TIG Module
Supplies high frequency for
superior starting, contactor
control, remote control
capability and a gas valve
for TIG welding.
superior starting, contactor
control, remote control
capability and a gas valve
for TIG welding.
Order K930-2.
Docking Kit
Provides a means to “dock”
the TIG Module on top of a
flat-roofed power source, or
any other flat surface meas-
uring at least 10 x 15 in.
(254 x 381mm). It includes a
latch and provisions for a
user-supplied padlock to
lock the TIG Module in
place.
the TIG Module on top of a
flat-roofed power source, or
any other flat surface meas-
uring at least 10 x 15 in.
(254 x 381mm). It includes a
latch and provisions for a
user-supplied padlock to
lock the TIG Module in
place.
Order K939-1.
Hand Amptrol™
Varies current for making
critical TIG welds. Fastens
to the torch for convenient
thumb control. Comes with
a 25 ft. (7.6m) cable. Fully
extend the slide forward to
achieve maximum current.
Returning to the start posi-
tion finishes the weld and
starts the afterflow cycle.
critical TIG welds. Fastens
to the torch for convenient
thumb control. Comes with
a 25 ft. (7.6m) cable. Fully
extend the slide forward to
achieve maximum current.
Returning to the start posi-
tion finishes the weld and
starts the afterflow cycle.
Order K963-1
(For smaller handle 9, 17
or 20 series torches).
Order K963-2
(For larger handle 26 or 18
(For smaller handle 9, 17
or 20 series torches).
Order K963-2
(For larger handle 26 or 18
series torches).
Foot Amptrol™
Varies current for making
critical TIG welds. Depress
pedal to increase current.
Depressing pedal fully
achieves maximum set cur-
rent. Fully raising the pedal
finishes the weld and starts
the afterflow cycle. Includes
25 ft. (7.6m) control cable.
critical TIG welds. Depress
pedal to increase current.
Depressing pedal fully
achieves maximum set cur-
rent. Fully raising the pedal
finishes the weld and starts
the afterflow cycle. Includes
25 ft. (7.6m) control cable.
Order K870.
Remote Control
Adapter
Adapter
Y connection adapter for
connecting K857, K963 or
K870 (6-pin plug connec-
tion) and wire feeder input
cable (14-pin plug connec-
tion) to power source’s 14
pin receptacle.
connecting K857, K963 or
K870 (6-pin plug connec-
tion) and wire feeder input
cable (14-pin plug connec-
tion) to power source’s 14
pin receptacle.
Order K864.
Amptrol Adapter Kit
Adapts Amptrol’s 6-pin
MS-type plug connection
to terminal strip on power
source.
MS-type plug connection
to terminal strip on power
source.
Order K843.
Water Valve
For use with TIG Module.
Shuts off water flow when
the arc is extinguished
when using Magnum
Shuts off water flow when
the arc is extinguished
when using Magnum
®
water-cooled TIG torches.
Order K844-1.
TIG Control Cable
Extension
Extension
Allows the TIG Module to
be operated at up to 45 ft.
(13.7m) from power source.
Connects between the 2 ft.
(0.6m) control cable and
the TIG Module.
be operated at up to 45 ft.
(13.7m) from power source.
Connects between the 2 ft.
(0.6m) control cable and
the TIG Module.
Order K937-45.
Recommended Options