Studer Innotec HPC5048 Manual Do Utilizador
STUDER
INNOTEC
HP-COMPACT
User manual
HP-COMPACT V3.0 E
3
1 General
Information
1.1 Operating
instructions
This manual is part of the delivery package of every HP-COMPACT inverter-charger. It
serves as guidelines for safe and efficient operation of HP-COMPACT. The instructions
are only valid for use with the following devices and options:
HP-COMPACT : HPC2512 – HPC4024 – HPC5048– HPC7048
Temperature sensor : CT-35
Remote Control : RCC 01
Remote power sharing : RPS-01
Every person who installs a HP-COMPACT and/or works with it must be fully familiar with
the content of this manual and must follow exactly all the warning and safety instructions.
Installation of or any work on the HP-COMPACT must be carried out by a skilled and
trained personnel. Installation and application must comply with the respective local instal-
lations codes and safety regulations.
1.2 Quality and Warranty
During production and assembling, all HP-COMPACT appliances go through many con-
trols and tests. Production, controls and tests are carried out in accordance with firm and
established procedures. Every HP-COMPACT has its own serial number, which helps to
refer back to its original data in the event of controls or repairs. That is why you should
never remove the identification plate showing the serial number. The production assembly
and tests on all HP-COMPACT appliances are totally carried out in our company in Sion,
Switzerland. The warranty for these appliances is valid for uses and operating possibilities
mentioned in this manual.
The warranty period for the HP-COMPACT is 2 years.
1.3 Warranty
serves as guidelines for safe and efficient operation of HP-COMPACT. The instructions
are only valid for use with the following devices and options:
HP-COMPACT : HPC2512 – HPC4024 – HPC5048– HPC7048
Temperature sensor : CT-35
Remote Control : RCC 01
Remote power sharing : RPS-01
Every person who installs a HP-COMPACT and/or works with it must be fully familiar with
the content of this manual and must follow exactly all the warning and safety instructions.
Installation of or any work on the HP-COMPACT must be carried out by a skilled and
trained personnel. Installation and application must comply with the respective local instal-
lations codes and safety regulations.
1.2 Quality and Warranty
During production and assembling, all HP-COMPACT appliances go through many con-
trols and tests. Production, controls and tests are carried out in accordance with firm and
established procedures. Every HP-COMPACT has its own serial number, which helps to
refer back to its original data in the event of controls or repairs. That is why you should
never remove the identification plate showing the serial number. The production assembly
and tests on all HP-COMPACT appliances are totally carried out in our company in Sion,
Switzerland. The warranty for these appliances is valid for uses and operating possibilities
mentioned in this manual.
The warranty period for the HP-COMPACT is 2 years.
1.3 Warranty
Disclaimer
We do not accept any liability for any damages occurring through use, manipulation, wor-
king situation and handling, which are not explicitly mentioned in these operating instruc-
tions.
Following cases are not covered by the warranty:
- High voltage at INPUT (i.e. 48V at the Battery INPUT of HP-COMPACT 2512)
- Reverse polarity on Battery connections (+/- reversed)
- Running liquid or oxidation through condensation in the appliance
- Defects caused by force, physical or mechanical means
- Changes not explicitly authorized by STUDER INNOTEC
- Not or only partly tightened screws and nuts after change of fuses or cables connecting
- Transport damage, i.e. through bad handling and /or packing
- Damage from atmospheric overvoltages (lightning)
1.4 Liability
king situation and handling, which are not explicitly mentioned in these operating instruc-
tions.
Following cases are not covered by the warranty:
- High voltage at INPUT (i.e. 48V at the Battery INPUT of HP-COMPACT 2512)
- Reverse polarity on Battery connections (+/- reversed)
- Running liquid or oxidation through condensation in the appliance
- Defects caused by force, physical or mechanical means
- Changes not explicitly authorized by STUDER INNOTEC
- Not or only partly tightened screws and nuts after change of fuses or cables connecting
- Transport damage, i.e. through bad handling and /or packing
- Damage from atmospheric overvoltages (lightning)
1.4 Liability
Disclaimer
Respecting this manual, servicing and method of installation, functioning, application and
maintenance of the appliance can not be controlled or supervised by STUDER INNOTEC.
Hence we do not accept any liability and responsibility for damages, losses and costs
which result through the use of this appliance or which result through incorrect installation,
incorrect operation or wrong application and maintenance, or which by some other means
maybe connected to each other.
The use of STUDER INNOTEC’s inverters does exclusively involve the user’s liability.
maintenance of the appliance can not be controlled or supervised by STUDER INNOTEC.
Hence we do not accept any liability and responsibility for damages, losses and costs
which result through the use of this appliance or which result through incorrect installation,
incorrect operation or wrong application and maintenance, or which by some other means
maybe connected to each other.
The use of STUDER INNOTEC’s inverters does exclusively involve the user’s liability.