Invacare Compressor Manual Do Utilizador

Página de 40
SECTION 3—CHECKLIST AND CYLINDER INSPECTION
17
DO NOT REMOVE THIS PRODUCT LABEL
Not for Commercial Resale
Invacare Corporation
2101 E. Lake Mary Blvd.
Sanford, FL 32773
1-800-832-4707
Part Number 1125090   Rev B - 11/04
OXYGEN
2
This cylinder is to be used with the Invacare Venture
HomeFill system. This cylinder contains 93 + 3% 
oxygen produced by an oxygen concentrator using 
the pressure swing adsorption process.
DO NOT handle cylinder or use contents until you are 
professionally trained, including emergency procedures.
WARNING
For medical applications. Use only as directed by a licensed
practitioner. Uninterrupted use of high concentrations of oxygen
over a long duration, without monitoring its effect on oxygen
content of arterial blood, may be harmful.
Oxygen Cylinders filled by the Venture HomeFill 
shall be used for personal use only. "Not to be 
filled for resale or use by professional users".
!
!
DANGER
Improper filling or abuse of this cylinder, or failure to follow
these safety instructions may cause serious bodily injury or 
death. High pressure oxidizing gas vigorously accelerates
combustion.
DO NOT alter or modify cylinder or related components.
DO NOT use Oil or Grease. Keep cylinder, cylinder valve, all 
equipment and connections free of oil and grease to avoid
violent ignition resulting in serious bodily injury or death.
Use in accordance with Venture HomeFill Operator’s Manual.
Open valve slowly. Close valve after each use and when empty.
Secure cylinder during storage and use. No smoking in cylinder
area. Keep away from heat, flame and spark. Keep out of 
reach of children. DO NOT drop.
Transfilling of this gas is performed by Venture HomeFill Only.
Cylinders that have been refinished and/or exposed to 
elevated temperatures must be hydrostatically tested before
filling. Cylinder temperature should not exceed 125°F (52°C).
Aluminum cylinders subject to the action of fire or heated to 
temperatures in excess of 350°F must be withdrawn from 
service and condemned by trained personnel. DO NOT use 
caustic paint strippers. Valve and safety relief devices must be 
removed and replaced by trained and authorized
personnel. DO NOT alter or change valve assembly.
+