Yamaha 3-axis model Manual Do Utilizador

10-16

When ZPH is attached for the 3rd-axis of the pole type, install the tool onto the
aluminum bracket at the end of the ZP-axis.
Twelve M6 coarse thread tap holes and two 

φ6 reamer holes are opened on the

bracket.

If the fitting length is less than 9mm, the threads could be damaged during
tightening. If the bolt screw length exceeds 30mm from the installation surface,
the screw could contact the Y-axis.

Select the minimum nominal length of the fixing bolt so that the length is 9mm or
more from the tool installation surface.

 (T

oler

ance betw

een knoc

k (0.02)

12-M6

×1.0

130

110

60

100

70

44

32

2-

φ6H7 Depth6

20

10