Weber 5000 Manual Do Proprietário

j)

Reinstall the Spider Stopper Guards. Slightly rotate 
the Spider Stopper Guards so that the seams are in 
line with the Venturi fins. There should be no gaps 
in the seams or in the fit around the burners and 
valves. Figure 16.

CAUTION:  If the Spider Stopper Guards do not fit
tightly, contact Weber-Stephen Customer Service.

CAUTION:  After reinstalling the gas lines, they
should be leak checked with a soap and water
solution before using the barbecue. (See Step
"Check for gas leaks".)

Venturi fin

Check fit around burner

Check fit around
valve

If the Crossover Ignition System fails to ignite the Front
burner, light the Front burner with a match. If the Front
burner lights with a match, then check the Crossover
Ignition System.

■

Check that both the white and black ignition wires 
are attached properly. Figure 17.

■

Check that the Crossover Ignition button pushes the
igniter (button) down, and returns to the up position.

■

Check to see if the igniter is loose in the frame. 
Tighten if necessary; see Step “Install igniter” for 
correct procedure.

If the Crossover Ignition System still fails to light, contact
Weber-Stephen Customer Service.

White wire

Black wire