Brother BAS-300G Manual Do Proprietário
3. INSTALLATION
BAS-300G, BAS-311G, BAS-326G
6
3-4. Installing the machine head
(1) Pins
[2
pcs.]
(2) Set screws [2 pcs.]
(3) Hinge rubber assemblies [2 pcs.]
(3) Hinge rubber assemblies [2 pcs.]
Place the machine head gently on top of
the oil pan and the rubber cushions.
the oil pan and the rubber cushions.
NOTE:
• Be careful not to get the cords
clamped between the machine head
and the oil pan.
and the oil pan.
• When holding the machine head, do
not hold it by the pulse motor. This
may cause problems with operation
of the pulse motor.
may cause problems with operation
of the pulse motor.
(4) Hinge holders [2 pcs.]
(5) Bolts
(5) Bolts
[4
pcs.]
(6) Plain
washers
[4
pcs.]
(7) Nuts
[4
pcs.]
(8) Head
rest
(9) Bolts with washer [4 pcs.]
2966B
Pulse motor
Approx. 20 mm
4913Q
Approx. 20 mm