Garmin PRO WT7900 Manual Do Utilizador

 Roll the paper forward so it rests on top of the

printer.

 Pull up the tension levers, then remove the adapters

from the paper roll.

 Place the roll in its original package.

 Grasp the left roll paper holder and slide it to the

right as far as it will go. Make sure the roll paper is
pushed all the way to the right.

Pull up the lock lever to lock the paper in place.

Press the

paper source button until

or

appears on the display. Choose

to cut the

paper automatically after each page is printed,
or

to decide for yourself when to cut the paper.

If the

light is not on, press the

button to

load paper.

Insert the paper all the way into the slot.

If the paper doesn’t come out, lower the suction by
pressing the

button. Return the suction to normal

after the paper is loaded.

Close the roll paper cover.

Press the

button to secure the paper. Wait for the

paper to move into position.

Select the paper type setting (such as ClearProof 

Film) to match the type of paper you’ve loaded.

 Open the roll paper cover.

 Press the

button to release the paper. The paper

rewinds automatically.

 If you don’t plan to reload paper immediately, press

the

button again to exit paper loading mode.

 Push down the lock lever firmly to release it. Then

grasp the roll paper holder and slide it all the way to
the left to release the roll.