Lexmark 5000 Series Manual Do Utilizador
7
Press
or
repeatedly until Fax Forward appears.
8
Press .
9
Press
or
repeatedly to view the current Fax Forwarding setting.
10
To turn off Fax Forwarding, press
or
repeatedly until Off appears.
11
Press to save the setting.
Can receive but not send faxes
These are possible causes and solutions. Try one or more of the following:
Check mode selection
To make sure the printer is set for faxing, press Fax Mode.
Check document placement
Load the original document facedown in the ADF.
Check the Dial Prefix setting
1
From the control panel, press Fax Mode.
2
Press
.
3
Press
or
repeatedly until Fax Setup appears.
4
Press .
5
Press
or
repeatedly until Dialing and Sending appears.
6
Press .
7
Press
or
repeatedly until Dial Prefix appears.
8
Press .
9
To change the setting, press
or
repeatedly until Create appears.
10
Press .
11
Enter the prefix to be dialed before each telephone number.
12
Press .
Check Speed Dial number
•
Check to make sure Speed Dial has been programmed for the number that you want to dial. See “Setting up
Speed Dial using the computer” on page 38.
Speed Dial using the computer” on page 38.
•
As an alternative, dial the telephone number manually.
Troubleshooting
136