Lexmark 5000 Series Manual Do Utilizador

If Ready or Busy Printing is listed as the Printer Status on the Status tab of the Print & Fax dialog while you are
attempting to print, try one or more of the possible solutions below:

Check that the USB cable is connected to the computer. The USB port on the back of the computer is marked

by the 

 USB symbol. Plug the long, flat end of the USB cable into this port.

Make sure that the smaller, more square end of the USB cable is plugged into the back of the printer.

Check that the USB cable is not damaged and that the 

 light is on.

With a document or photo open, click File 

Œ Print.

From the third pop-up menu from the top, choose Quality & Media.

From the Paper Type pop-up menu, select the paper type loaded.

From Print Quality, select:

Photo for excellent print quality and reduced print speed

Normal for good print quality and average print speed

Quick Print for reduced print quality and faster print speed

Try printing a different image. If it prints correctly, the problem may be with the program you are using. For more
information, see the program documentation.

Press 

 to turn the printer off.

Make sure the power to the print server is off.

Remove the USB cable from the external print server.

Disconnect the external print server from the computer.

Connect the printer USB cable to the printer.

Press 

 to turn the printer back on.

With a document or photo open, click File 

Œ Print.

From the third pop-up menu from the top, choose Quality & Media.

From the Paper Type pop-up menu, select Transparency.

From Print Quality, select:

Photo when printing photos

Normal when printing transparencies

Troubleshooting