Lexmark 5000 Series Manual Do Utilizador
Note: If the computer or printer is turned off while the camera is connected, you must disconnect and then reconnect
the camera.
the camera.
Working with photos
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
Printing photos using the computer
1
Load photo paper, with the glossy or printable side facing you. (If you are not sure which side is the printable
side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 18.
side, see the instructions that came with the paper.) For more information, see “Loading paper” on page 18.
2
Customize the settings as needed in the Page Setup dialog.
a
With a photo open, choose File
Page Setup.
b
From the “Format for” pop-up menu, choose 5000 Series.
c
From the Paper Size pop-up menu, choose the paper size loaded.
d
Choose an orientation.
e
Click OK.
3
Customize the settings as needed in the Print dialog.
a
With a photo open, choose File
Print.
b
From the Printer pop-up menu, choose 5000 Series.
c
For Mac OS X version 10.4 or later, click Advanced. Otherwise, proceed to the next step.
d
From the Copies & Pages pop-up menu, type the number of copies to be printed.
e
From the same pop-up menu, choose Quality & Media.
•
From the Paper Type pop-up menu, choose the type of paper you are using.
•
From the Print Quality area, choose Automatic or Photo.
f
Click Print.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
Related topics:
•
Printing cards
1
Load greeting cards, index cards, or postcards.
Notes:
•
Make sure the thickness of each card does not exceed 0.020 inch (0.50 mm).
•
Make sure the print side of the card faces you.
2
Customize the settings as needed in the Page Setup dialog.
a
With a document open, click File
Page Setup.
b
From the “Format for” pop-up menu, choose 5000 Series.
c
From the Paper Size pop-up menu, choose a card size.
Working with photos
81