KYOCERA FS-C5300DN Manual Do Utilizador

6-52

Using the Operation Panel 

A new hard disk must be formatted before it can be used in the printer. 
Formatting allows data to be written to the hard disk.

This menu is displayed only when the optional hard disk is installed on the 
printer.

Use the procedure below to format the hard disk.

When a new hard disk is inserted in the printer's slot, 

Format error 

Hard disk will appear on the message display.

1

Press 

Z while >Hard Disk > is displayed.

2

>>Format appears.

3

Press [OK]. A blinking question mark (

?) appears.

4

Press [OK] again.

Processing appears and formatting of the hard disk starts. When 
the formatting is successfully completed, the display returns to 
Ready.

The printer is equipped with a slot for a memory card. By inserting a 
memory card into the printer, the following operations become available.

• Format (Formatting memory card)

For details about the handling of the memory card, refer to Memory 
Card on page 7-5.

IMPORTANT  The Memory Card menu options are only displayed 
when a memory card is installed in the printer.

1

Press 

Z while Device Common > is displayed.

2

Press 

U or V repeatedly until >Memory Card > appears.

Formatting will destroy any existing data on a storage 

device including a used hard disk.
Formatting of the hard disk must be executed from the printer.

>>Format ?

>Memory Card   >