KYOCERA FS-C5300DN Manual Do Utilizador

 

Glossary-1

Glossary

An additional memory (optional) is used for increasing the memory 
capacity of this machine. For DIMM that can be used in this machine, 
contact your service technician.

AppleTalk offers file sharing and printer sharing and it also enables you to 
utilize application software that is on another computer on the same 
AppleTalk network.

This indicates the device, such as a computer or router, that serves as the 
entrance/exit (gateway) for accessing computers outside of the network 
that you are on. When no specific gateway is designated for a destination 
IP address, data is sent to the host that is designated as the Default 
Gateway.

This is a protocol that automatically resolves the IP address, Subnet 
Mask and Gateway address on a TCP/IP network. Use of DHCP 
minimizes the load of network administration, especially on network 
environments with a large number of client computers where it is not 
specifically necessary to assign a separate IP address to each client, 
including printers.

This indicates the number of dots printed per inch (25.4 mm) as a unit for 
expressing resolution.

This is a printing mode that reduces toner consumption. Pages printed in 
the EcoPrint mode are lighter than pages printed in the normal mode.

This refers to emulation of other manufacturers’ printers. The printer 
emulates operation of the following printers: PCL6 and KPDL.

While data is being sent to a printer, some pauses may occur. At this time, 
the printer waits for the next data without making a page break. Form feed 
timeout is a function to wait only a preset amount of time before it 
executes an automatic page break. After the waiting period begins, once 
the designated amount of time is exceeded, the printer will automatically 
process the currently received data and print it out. If the machine has 
received no print data for the last page, the printer ends processing of that 
job without outputting paper.