KYOCERA FS-C5300DN Manual Do Utilizador

2-4

Handling Paper 

This section describes the guidelines for selecting paper.

Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, 
or contaminated with lint, clay, or paper shreds.

Use of paper in these conditions can lead to illegible printing and paper 
jams, and can shorten the life of the machine. In particular, avoid using 
paper with a surface coating or other surface treatment. Paper should 
have as smooth and even a surface as possible.

Do not use paper that has been coated or surface-treated and contains 
plastic or carbon. The heat of fusing can cause such paper to give off 
harmful fumes.

Bond paper should contain at least 80 % pulp. Not more than 20 % of the 
total paper content should consist of cotton or other fibers.

Cassettes and the MP tray are available for the paper sizes listed in the 
table below. For details, including the paper sizes for the paper feeder 
(Optional paper feeder PF-500, PF-510) refer to Cassette (1 to 4) Size 
(Setting the cassette paper size) on page 6-28.
The dimensional tolerances are ±0.7 mm (±0.0276 inches) for the length 
and width. The angle at the corners must be 90° ±0.2°.

Env. Monarch

3-7/8 × 7-1/2 inches Legal

8-1/2 × 14 inches

Envelope #10

4-1/8 × 9-1/2 inches Letter

8-1/2 × 11 inches

Envelope #9

3-7/8 × 8-7/8 inches ISO A4

210 × 297 mm

Envelope #6

3-5/8 × 6-1/2 inches ISO A5

148 × 210 mm

Envelope DL

110 × 220 mm

ISO A6

105 × 148 mm

JIS B6

128 × 182 mm

Envelope C5

162 × 229 mm

Hagaki

100 × 148 mm

ISO B5

176 × 250 mm

OufukuHagaki

148 × 200 mm

JIS B5

182 × 257 mm

Youkei 2

114 × 162 mm

Statement

5-1/2 × 8-1/2 inches

Youkei 4

105 × 235 mm

Executive

7-1/4 × 10-1/2 inches

Oficio II

8-1/2 × 13 inches

Folio

210 × 330 mm

16 kai

197 × 273 mm

Custom

Cassette: 105 to 216 mm × 148 to 356 mm 

(4-1/8 to 8-1/2 inches × 5-13/16 to 14 inches)

MP Tray: 70 to 216 mm × 138 to 356 mm 

(2-3/4 to 8-1/2 inches × 5-7/16 to 14 inches)