Konica Minolta 210 Manual Do Utilizador
3
Before making copies
3-56
bizhub 162/210
3.15
Interrupting copy jobs
Long continuous copy operations can quickly be paused by pressing the [In-
terrupt] key in order to copy a different document.
terrupt] key in order to copy a different document.
2
Note
Some functions cannot be interrupted. In addition, some functions are
not available while a copy job is interrupted. For details, refer to “Function
combination matrix” on page 9-10.
Some functions cannot be interrupted. In addition, some functions are
not available while a copy job is interrupted. For details, refer to “Function
combination matrix” on page 9-10.
If the document is placed on the original glass and 2in1 or 4in1 copies are
being produced, the copy job cannot be interrupted.
being produced, the copy job cannot be interrupted.
To interrupt a copy job
1
Press the [Interrupt] key.
The interrupt indicator lights up. The
current copy operation is paused. All
functions are reset to their defaults.
current copy operation is paused. All
functions are reset to their defaults.
2
Remove the current document. Posi-
tion the other document that you
wish to copy.
tion the other document that you
wish to copy.
3
Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page 4-3.
For details, refer to “Making a basic
copy” on page 4-3.
4
Using the 10-key pad, enter the
number of copies to be made.
number of copies to be made.
5
Press the [Start] key.
This will start the copy cycle.
6
After the other document is copied,
press the [Interrupt] key.
press the [Interrupt] key.
The interrupt indicator goes off. All
copy functions return to their previous settings.
copy functions return to their previous settings.