Lexmark 036 Manual Do Utilizador
Scanning to a computer or flash drive
Automatic document feeder (ADF)
Scanner glass
•
Use the ADF for multiple
‑page or two-sided
documents.
•
Load the original document faceup.
•
Use the scanner glass for single
‑page documents, book pages,
small items (such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
paper, or thin media (such as magazine clippings).
•
Place the document facedown in the corner with the arrow.
Setting up Scan to Computer
Notes:
•
This feature is supported only in Windows Vista or later.
•
Make sure your computer and printer are connected to the same network.
1
Open the printers folder, and then select your printer.
Note: If your printer is not in the list, then add your printer.
2
Open the printer properties, and then adjust the settings as necessary.
3
From the control panel, touch Scan to Computer > select the appropriate scan setting > Send It.
Scanning to a flash drive
1
Load an original document into the ADF tray or on the scanner glass.
2
Insert the flash drive into the USB port.
3
Select the destination folder, and then touch Scan to USB drive.
4
Adjust the scan settings, and then touch Scan It.
Scanning
114