Ricoh IS 2430 Manual Do Utilizador

When a Message Is Displayed

71

Fatal error has 

occurred in the 

scanner.

An unrecoverable error 
has occurred on the ma-
chine.

Contact your service representative.

Cannot connect to 

the scanner. 

Check the network 

Access Mask set-

tings in User 

Tools.

An access mask is set.

Contact the network or scanner administrator.

Scanner is not 

ready. Check the 

scanner and the 

options.

The ADF cover is open.

Check whether the ADF cover is closed.

Insufficient mem-

ory. Reduce the 

scanning area.

Scanner memory is in-
sufficient.

• Reset the scan size.

• Lower the resolution.

• Set with no compression. See the 

TWAIN Driver Help.

The problem may be due to the follow-
ing cause:

• “The Relationship between the Reso-

lution and the Scanning Area” chart 
in Help for halftone scanning might 
not always apply. Scanning cannot 
be performed if large values are set 
for brightness when using halftone 
or high resolution.

Insufficient mem-

ory. Reduce the 

scanning area.

When a paper misfeed 
occurs in the machine 
during printing, scanning 
cannot be performed. 

After the misfed paper has been re-
moved, proceed with scanning.

Cannot find "XXX" 

scanner used for 

the previous 

scan. "YYY" will 

be used instead.

(“XXX” and “YYY” indi-
cate scanner names.)

• The main power 

switch of the previ-
ously used scanner is 
not set to “On”.

• The machine is not 

connected to the net-
work correctly.

• Check whether the main power 

switch of the scanner used for the 
previous scan is turned off.

• Check whether the scanner used for 

the previous scan is connected to the 
network correctly.

• Deactivate the personal firewall of 

the client computer.

• Use an application such as telnet to 

make sure SNMPv1 or SNMPv2 is 
set as the machine’s protocol. See 
“Network Settings”, General Set-
tings Guide and “Using telnet”, Net-
work Guide.

• Select the scanner used for the previ-

ous scan.