Ricoh JP1210 Manual Do Utilizador
Optional Functions
54
2
Printing in Two colours
After printing in one colour, you can
print in another colour on the same
side of the print.
print in another colour on the same
side of the print.
Important
❒ Leave the prints for a while before
printing on them again to let the
ink dry.
ink dry.
❒ If the prints are not dry, the paper
feed roller might become dirty. In
this case, wipe off the roller with a
cloth.
this case, wipe off the roller with a
cloth.
Note
❒ You cannot print in two colours at
one time.
A
Prepare the two originals. Set the
first original on the exposure
glass.
first original on the exposure
glass.
B
Press the
{{{{
Start
}}}} key.
C
Check the image position of the
trial or proof print.
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the
{
Image
Position
} keys (see
⇒
P.9 “Shift-
ing the Print Image Position For-
ward or Backward”) or the side
tray fine adjusting dial (see
ward or Backward”) or the side
tray fine adjusting dial (see
⇒
P.10 “Shifting the Print Image Po-
sition to the Right or Left”).
sition to the Right or Left”).
D
Enter the number of prints with
the number keys.
the number keys.
E
Press the
{{{{
Print
}}}} key.
GRPREP0E
TSLS012E
TSLS011E
TSLS014E
SilverV-gb.book Page 54 Monday, May 15, 2000 3:32 PM