Ricoh 8060 Manual Do Utilizador
Network Settings
23
1
Reference
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with an
Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. When both ethernet and wireless LAN (IEEE 802.11b) are connected,
the selected interface takes precedence.
the selected interface takes precedence.
❒ If [Delivery Option] is set to [On], check that IPv4 Address is set.
Heading
Setting Item
Setting Requirements
Interface Settings/Network Machine IPv4 Address
Necessary
Interface Settings/Network IPv4 Gateway Address
As required
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network DDNS Configuration
As required
Interface Settings/Network Domain Name
As required
Interface Settings/Network WINS Configuration
As required
Interface Settings/Network Effective Protocol
Necessary
Interface Settings/Network Ethernet Speed
As required
Interface Settings/Network LAN Type
Necessary
Interface Settings/Network Permit SNMPv3 Communication
As required
Interface Settings/Network Permit SSL / TLS Communication
As required
Interface Settings/Network Host Name
As required
File Transfer
Delivery Option
As required
File Transfer
Fax RX File Transmission
As required
File Transfer
Scanner Resend Interval Time
As required
File Transfer
Number of Scanner Resends
As required