Ricoh SGC 1506 Manual Do Utilizador
18
E
Set paper size using the printer driver and the control panel.
For details, see p.19 “Setting the Paper Size and Paper Type of the One Sheet
Bypass Tray”.
For details, see p.19 “Setting the Paper Size and Paper Type of the One Sheet
Bypass Tray”.
Note
❒ Paper within the following dimensions can be set in the One Sheet bypass
tray:
• Vertical: 90 - 305 mm (3.55 - 12 in.)
• Horizontal: 148 - 600 mm (5.83 - 23.62 in.)
• Vertical: 90 - 305 mm (3.55 - 12 in.)
• Horizontal: 148 - 600 mm (5.83 - 23.62 in.)
❒ Be sure to set the paper with the side you want to print facing up in the One
Sheet bypass tray.
❒ The number of sheets that can be loaded in the One Sheet bypass tray de-
pends on the paper type.
Reference
For details about setting paper in the regular paper tray, see General Set-
tings Guide.
When loading custom size paper, see p.20 “Setting Custom Size Paper”.
When loading thick paper (over 90.2 g/m
For details about setting paper in the regular paper tray, see General Set-
tings Guide.
When loading custom size paper, see p.20 “Setting Custom Size Paper”.
When loading thick paper (over 90.2 g/m
2
), OHP transparencies, or enve-
lopes, set paper size and paper type. For details, see p.22 “Setting Thick Pa-
per, OHP Transparencies, or Envelopes”.
When loading letterhead paper, pay attention to its orientation. See Gener-
al Settings Guide.
per, OHP Transparencies, or Envelopes”.
When loading letterhead paper, pay attention to its orientation. See Gener-
al Settings Guide.