Ricoh Printer/Scanner Manual Do Utilizador

Staple

43

❒ Stapling can be done only with the optional finisher installed.

❖ Staple printing will be canceled under the following conditions:

• If the number of pages to staple exceeds maximum.
• If a paper size that cannot be stapled is selected.
• If a paper type that cannot be stapled is selected.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in the duplex mode and

the staple position.

• If there are inconsistencies between the orientation in letterhead mode and

the staple position.

• If paper sizes are mixed when a different paper size is specified during a

print job.

• When feeding paper from the bypass tray.
• When staples have run out and Auto Continue is set (printing will contin-

ue without stapling after the message has been displayed).

• When only 1 page is printed.
• When staples have run out.

❒ If Staple is selected with the optional Finisher SR3010 installed, the paper will

be output to the finisher shift tray irrespective of the setting.

❒ When printing on letterhead, stapling may not be at the specified position. 
❒ If you cannot make staple settings even with Finisher SR3010 installed, op-

tions may not be set correctly in the printer driver. Correct option settings in
the printer driver. For details, see the printer driver Help. 

❒ When the finisher is being used for another function's job (for example, a copy

job), printing will start after that job ends. 

❒ Be sure to set paper size and orientation in the printer driver when stapling. 
❒ When duplex printing is selected, adjust staple positions to the binding orien-

tation. 

❒ Depending on the software you are using, print settings may not be saved

and the printed result may not be as expected. 

❒ When setting Staple in the printer driver settings, make sure that a collate op-

tion is not selected in the print settings of the application. If a collate option is
selected in the application, printing will not be as intended.