Ricoh LF 125 (H915) Manual Do Utilizador

F

AXING

4.22

Using the Broadcasting button on the control panel, you can use 
the broadcasting fax feature, which allows you to send a document 
to multiple locations. Documents are automatically stored in the 
memory and sent to a remote station. After transmission, the 
documents are automatically erased from the memory.

Load the document(s) face down into the ADF.

For details about loading a document, see page 4.5.

Adjust the document resolution to suit your fax needs. See 
page 4.6.

If you need to change the darkness, see page 4.3.

Press Broadcasting on the control panel.

Enter the number of the remote machine using the number 
keypad.

You can use one-touch keypad or speed dial or group dial 
numbers. For details about storing a number, see page 4.15.

Press Enter to confirm the number. The display asks you to 
enter another fax number to send the document.

: The Another No. prompt does not appear if you have 

added numbers for another broadcasting or delay fax job. You 
must wait until the job is completed.

To enter more fax numbers, press 1 to select “Yes” and 
repeat steps 4 and 5. You can add up to 10 destinations.

Note that you cannot use group dial numbers for another 
fax number.

When you finish entering fax numbers, press 2 to select 
“No” at a Another No. prompt.

The document is scanned into the memory before 
transmission. The display shows the memory capacity and 
the number of pages being stored in the memory.

The machine begins sending the document in order of the 
numbers you entered.