Ricoh 1060 Manual Do Utilizador
User Tools (System Settings)
74
5
Accessing User Tools (System Settings)
This section is for key operators in
charge of this machine. You can
change or set the machine's default
settings.
charge of this machine. You can
change or set the machine's default
settings.
Note
❒ Operations for system settings are
different from normal operations.
After using User Tools, be sure to
exit.
After using User Tools, be sure to
exit.
⇒ p.74 “Exiting from User
Tools”
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the
main power switch or operation
switch is turned off, or the
{{{{Energy
Saver
}}}} or {{{{Clear Modes}}}} key is
pressed.
Changing Settings
Note
❒ If a key operator code has been set,
the key operator code entry dialog
box appears. Enter the code, and
then press the [OK] key.
box appears. Enter the code, and
then press the [OK] key.
⇒ p.90
“Key Operator Code”
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press the [System Settings] key.
CCCC
Select the desired menu, and then
press the desired key.
press the desired key.
DDDD
Change settings by following in-
structions on the display panel,
and then press the [OK] key.
structions on the display panel,
and then press the [OK] key.
Note
❒ To cancel changes made to set-
tings and return to the normal
function display, press the
function display, press the
{{{{User
Tools/Counter
}}}} key.
Exiting from User Tools
AAAA
Press the
{{{{User Tools/Counter}}}} key.
Changing system settings is fin-
ished, and the machine returns to
Copy or Print mode.
ished, and the machine returns to
Copy or Print mode.
Note
❒ You can also exit from User
Tools by pressing the [Exit] key.
MartiniC1_GBzen2_FM.book Page 74 Friday, April 19, 2002 2:18 PM